You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
A
Thank you for the tips @Devnull,
I think the manufacturer's crossover recommendation is for pro audio use where they commonly power...
-
A
Thank you for all the suggestions. My original idea was to use a line array of small-diameter drivers coupled with a compression driver...
-
A
Good points. Keeping the width of the towers narrow is important to me, so I can't really use two 8-inch drivers to achieve 100 dB/W...
-
A
I've done a quick calculation in WinISD, and above 300 Hz, I can achieve 100 dB with two drivers at 2.83V to accommodate the low...
-
A
Ok, achieving 106 dB sensitivity doesn't seem realistic, even with a line array. How about wiring two of these 94 dB/W 6.5" mid-woofers...
-
A
I'm thinking of building a pair of 7" wide mini-towers with a sensitivity of 106 db/w, using the following drivers (chosen for their...