My adventures in stereo
Senior Member
- Joined
- Feb 9, 2022
- Messages
- 305
- Likes
- 296
I have been setting my low pass & high pass values to 80 hz -12 db on my minidsp systems
Noticed that on measuring through REW, this value causes a significant loss of gain from 50 to 150 hz, compared to unfiltered curve
I played around with values, setting high pass to 80 hz at -6 db and low pass to 50 hz at - 6db
Gave me the least destructive result
So my recommendation based on the above is not to blindly, set your high pass & low pass to the default 80 hz, measure & tweak instead
My gear
minidsp SHD, REW for measurements
Nad C 298 power amp
Revel M 126 Be
SVS PB 2000 Pro x3
Noticed that on measuring through REW, this value causes a significant loss of gain from 50 to 150 hz, compared to unfiltered curve
I played around with values, setting high pass to 80 hz at -6 db and low pass to 50 hz at - 6db
Gave me the least destructive result
So my recommendation based on the above is not to blindly, set your high pass & low pass to the default 80 hz, measure & tweak instead
My gear
minidsp SHD, REW for measurements
Nad C 298 power amp
Revel M 126 Be
SVS PB 2000 Pro x3