Congrats Colin. What a cool picture of you two!
Now, did you say your Moto phone exploded???
Now, did you say your Moto phone exploded???
Well at least some cake for your ASR brothersI wish I could have invited more, but only had room for 50 people.
My mum nether came has she hates travel, so I had only 5 members of my tribe there.
I wish I could have invited more, but only had room for 50 people.
My mum nether came has she hates travel, so I had only 5 members of my tribe there.
Well at least some cake for your ASR brothers
Congratulations Mr 'the wonf' wonfor it's great you enjoying yourself after trying times
I forgive your oversight, not sure the members will be so generous they can be very unreasonable when cake is involved...Sorry cake gone I had the last bit today with my cheese sandwich mmmm nice.
You damn right!! No cake , no invite ...I forgive your oversight, not sure the members will be so generous they can be very unreasonable when cake is involved...
Yes the MOTO E mobile phone exploded into flame and set the hotel Fire Alarm of I managed with some minor burns to throw it on to the balcony, and then pour lots of water on it.
The Glass front had melted and stuck to the tiles on the floor of the balcony, lots and lots of nasty smoke, Maria has the same phone and we have replaced it now for a new one. Thank God it never went of in my pocket, I would have a burnt bum. So be warned it also destroyed the SIM card and the Micro SD card with phone and book data on, nasty it was only 2 years old.
Looks like 300 ohm antenna cable! But surely that is not it.
Looks exactly like the old DNM stuff, from 30 years ago - I used this to rewire my speakers on the first "good" playback rig ...A snap shot of the New EWA Speaker cable.
This speaker cable supersede any cable I have designed in the past. And will be a costing you less than some cables I have designed.
Looks exactly like the old DNM stuff, from 30 years ago - I used this to rewire my speakers on the first "good" playback rig ...
Hmmm ... I looked up images of DNM speaker cables, and can't see anything that matches what I used. So either I have the brand wrong - senior moment! - or it was some very short term variation. It was extremely stiff, just bend it to the position required and leave it sitting in the air, waiting to be soldered into place ...Except Denis did use 300Ohm FM cable and this is 25mm wide not 13mm wide and can take about 30A not 2A so no smoke, and more mmmmm Bass mmmmm lovely.
Ah.. Socialism becomes capitalism..Here is the scary price list:-