Search results

Neat solution. What are they standing on.

I use Sony who seemed to have abandoned action cams. Depending on your use case check out drift ghost. The are said to work fine and are inexpensive.

Evening in Paris.

I've recently acquired a Sony 70-400 SSM G II for the Alpha mount and combined with the A99 its been a pretty awesome combination. I typically use vintage G lenses but this is next level. The last and best A mount lens they made.

Although this is now old, I will have another go at explaining "Fosis can't have more detail than nCore". It would argue this conversation is not about the amplifier alone providing more detail but the combination of the amplifier implementation and subsequent tuning in the system in the...

And so a further update. I've updated Dirac to 3.21.2 the latest. I've plugged the mic into the M10 directly, previously I had it into the laptop I was recording the calibration data. This time its been driven from a Mac rather than a PC and I've generated two new profiles. One is using the...

I learned about this after the fact. I always had a bit of a bump but it would have needed a lot of gain to compensate.

The need has now passed. The sub is always on but it needs a suitable audio signal to power up and make noise. That’s one issue. The other is the huge variation in the output signal to the sub lacking sufficient gain for the sub to work properly. Not just me but anyone with the V1 or Bluesound...

PSB Imagine minis on the wall and PSB Subseries 200 powered with a NAD plate amp. Its a sweet small room system. Had these speakers a while and I like them a lot. https://www.psbspeakers.com/int/subseries-200-subwoofer

This is the exact advice I got from the NAD service desk. If only the PSB sub series 200 had a 12v input - which they should know since they are also the PSB service desk.

Circling back to your observation after some time. The V1 had some gain issues in matching the amps and sub such that the sub would not wake with the main speakers. If using just full range speakers and no sub then not an issue. But in 2+1 it was unusable and also reported by Bluesound users as...

I have not faced these issues with the M1. Is the firmware up to date?

I replaced the ncore amplification in my NAS M10 with a V3 mono pair with muses op amps. Much better I feel. The M10 monitor screen indicates the ncore amps at up to 65C. The Fosi get up to 40C on the case. If they were in a massive case no one would even know or care. Anyway satisfied with...

A pair of 2006-ish Orbea's. Both are Orca variants, the front one is an Onix (11 speed SR), the rear an Opal (10 speed Ultegra).

It is but I think one needs to step back and take a wider view. Folks here have a particular alignment when if comes to audio, basically performance and value. If you go to a high end audio store in Hong Kong lets say or Japan, you'll see things you've never even heard of at prices that will...

Has anyone here actually auditioned this unit? If not all comments are speculation only based on measurements and images. To the design team, I would make the following comments: I applaud your ambition and have no doubt your team has what it takes to position a new product in a competitive...

This is the great thing with today's tech, so many ways to solve the problem of extended gear range. As with all things, pros and cons for different approaches. The best solution as always the one that works for the rider.

The gravel bike, Cannondale Topstone. Aluminium, GRX 400. Better wheels and 40mm Pirelli gravel M tires. Capable machine on a budget. https://gallery.heinrich.id.au/bike-stuff/topstone

2006-ish Orbea Onix + Super Record 11 speed. Scirocco wheels. This one goes like the wind. I have another of these as well, Shimano + custom wheels. Nice things.

Two are Potenza 11 speed. One is Vintage Super Record and other things for Eroica. https://gallery.heinrich.id.au/bike-stuff/frank Frank was a bit big and is gone but drivetrain moved over to the green machine. https://gallery.heinrich.id.au/bike-stuff/green-machine And this is how to have...