Search results

I would consider making an in-ear mic, ideally open earcanal, but blocked earcanal mics are more DIY friendly and are likely still more accurate than a 43AG or 5128 for the listener wearing the mic. You won't have a target of course and that is the biggest drawback, but if you already have a...

I had the same issue with the Sundara and HE400SE. It's been an issue in general for me and my dumbo ears :D I feel like headphone manufacturers should at least be targeting 65mm+ given the standards and all Oh well, *puts on HD800* I have never been this excited for a headphone release...

Oh right, my bad :D Yeah, it doesn't look like there's much of a swivel mechanism on the dynamic headphone. Someone posted some photos of them on r/headphones Hopefully it at least has something like the HD600/HD650's swivel mechanism.

I was also surprised by the Porta Pro's spatial qualities when EQ'd. It made me wonder if the pressure created when we enclose our ears inside a small volume is somehow a bag thing. But oratory doesn't think so and I have been told the HD820 and HD800 are similarly spacious sounding when Harman...

I sold my K712 when I realised the pads alone cost £100 haha I think the K612 is tuned better and the pads are more reasonably priced too :)

I tried with the built-in equalizer in REW, so not quite 500 bands haha I used open earcanal mics that sit at the EEP. I couldn't make my HD600 and HD800 sound the same with respect to "spatial qualities". But I think a large part of it is down to how a headphone feels on your head. Do the...

@amirm Did the Ananda have similar spatial qualities? Oratory believes the HD800’s “spaciousness” is because you don’t feel anything on your ears, or at least it’s contributing to the illusion (you can almost forget you're wearing them!). And there seems to be a trend here…

I contacted Topping about it when the original DX3 was released. They said there wasn’t enough room for a large display and a 1/4" jack, and that a larger display is preferable.

This would be an instant buy for me if it had a 1/4" jack :(

Some headphones behave worse than others with a less than ideal seal, Keith Howard tests this over at headphonetestlab Ether 2: And the LCD-X for comparison:

I'm not sure how many HD598 units oratory has measured, but the one I sent in was the SE version. It's hard to overestimate the impact pads have on the tuning of headphones. It would be like reviewing a used pre-built computer that originally had an RTX 3090, but the previous owner swapped it...

@MayaTlab I would ask oratory if he'll measure your headphones and then measure them on your head when Harman EQ'd, and use that as some kind of reference. It won't be perfect, but it's better than nothing, and I don't see much variation between Harman EQ'd headphones on my head until about 7...

Their 2 ohm output-impedance specification has been there for over a year. When I asked in February 2018, they said no revisions had been made to the D3, but at some point the output-impedance specification was changed from 10 ohms to 2 ohms. When I mentioned Archimago's ~10 ohm output-impedance...

Sennheiser HD800 Koss Porta Pro

I sent them an e-mail about this. They said there wasn't enough room for a 6.35mm jack with the screen, and that a smaller volume knob wouldn't be good. So it seems like they would have liked a 6.35mm jack too, but a compromise had to be made.

Haha, thanks. I have been pretty excited for this review and completely missed it :)

I was considering a D30+A30 stack, as the 10 ohm output-impedance won't be a problem for me, and will look damn nice next to my HD800. I wish they went with a 6.35mm jack instead, or even better, 3.5mm + 6.35mm like we saw on the rHead, but I'm still interested :) Any news on the price?

I don't think it will measure as well as the O2 or Element, but I don't think there will be any flaws, and it's probably still transparent. I would rather have its stepped attenuator than a few extra zeros! If you're still interested after Amir has measured it, and have any problems finding one...

I have sold my rHead to Amir (still in transit, but it should be with him soon). I would have loaned it to him if not for being in the UK. I didn't have a reason to sell it, but I'm interested to see how it measures, and I can always buy another one as they're very reasonably priced here in...