TRDK
Member
I am looking for DSP Engine: Parametric equalizer - settings for Astell & Kern Pathfinder
Thanks for any help
Torben
Thanks for any help
Torben
THX - No to both, but BIG thanks. . I am NEW to this topic. I am looking for the settings for Roon.I can make you some. Do you have a Windows PC where you can use Equalizer Apo for A/Bing the presets? And do you already have a preferred target curve?
BIG THANKS I will have look tomorrowI've found three frequency response measurements of the Pathfinder online:
View attachment 246838
I ran them all through the AutoEQ Python script. Two different frequency response targets were used:
View attachment 246839
All six presets (3 measurements * 2 targets) are attached to the post. The PEQ values that you have to copy into Roon are in the "[...] ParametricEQ.txt" files.
- Harman IE2019v2 is the default target used by Amir, Dr. Sean Olive, oratory1990 etc.
It has a bad reputation for being shouty though (too much 3-6kHz), which I agree with, so it's not my first choice or recommendation.- The static IEM target is Crinacle's IEF Neutral plus the bass shelf from the Monarch MKII. It's what sounds most neutral to my ears and what I recommend you try first.
Keep in mind that some of the filters are High shelf or Low shelf, which you need to select in Roon.
The presets are designed for 44.1kHz sample rate. If your DSP runs at 96kHz or higher, then that will result in the filter response being off.
Pathfinder Super IEF is Super* Review's measurement of the Pathfinder EQed to the red target in the frequency response target graph above.Is "Pathfinder Super IEF" the Crinacle version?
Me tooI prefer the Crinacle
I can redo the preset with another target sample rate. Is Super IEF the one you prefer? And what sample rates do you listen to the most?The small "challenge", with my Astell & Kern Pathfinder I mostly listen to high resolution.
No.Is "Super IEF = Crinacle"?
I don't understand the question.So this one?
If we know the Q value that the SP3000's GEQ uses, then we can generate an accurate EQ preset.Hi there everyone,
I’ve recently purchased an A&K SP3000 with the Pathfinders. Does anyone have EQ settings for the 20 band EQ on the A&K for the Pathfinders. I’ve looked online but no luck.
Thanks,
Mike