D
Deleted member 3116
Guest
I would guess none, I cant think of anything.
why? Im curiousI would like to see THD+N not at 200kohm impedance load but at 600 ohm. There is any chance ?
this was blind?
It will do the full decode for the few tidal mqa files that go there to 24/192. Software goes up to 24/96. I'll not comment on the value to the listener.Does the MQA version would have any benefits with tidal app since the tidal app already doing the decoding, yes it is software based but is there any audible difference or just a confirmation light of MQA is there to please. Please note this post is not about MQA format and how it is considered lossy and all. This post is a question whether the MQA version would have any benefits when used with Tidal app?
I contacted topping, and they were quick to reply, so kudos to them.Hi, I have run into a small issue with my D90 and I hope someone out there has a solution for this:=
The chain of components:
NAS->Cambridge CXN v2 -> Topping D90 ->Power Amlifier
When removing the D90form the chain, playing DSD64 files the CXN plays them nicely on their own.
When I connect the D90 to the chain after CXN, it receives files as 176,4khz, and there is no sound output.
All other outputs works perfectly, 88,2, 96, 192 and so on for all other files.
Do you have any suggestions as to get D90make some sound when it receives 176,4 khz input?
Hello and thanks a lot for letting me in! I have read @amirm review of Schiit compared to Topping DX7/S. Lucky me! Was on my way ordering a Schiit DAC but immediately changed my mind of obvious reasons. Today I have one Topping DX7/S and will buy one more DAC (I have two separate 2 channels audiosystem) After reading @amirm tests I will buy either Topping DX7 Pro or Topping D90. I´m gonna use the DAC solely as DAC (don´t use headphones. I have one Krell KSA-150 and two Krell MDA-300 driving a pair of Infinity Epsilons. Musicsources are Linn Sondek LP 12, Esoteric X-05, Bladelius Embla Classic and Revox B77. Which one of the two DACs, D70 Pro or D90 do You guys think would be my best choice? Price does not matter. Cheers from Sweden and keep up the good work! It´s really appreciated
Do I need to activate DAC mode every time I turn it on or does it save settings between restarts?
So what is point of using DAC mode? why take away volume control for no reason?
I would be interested to see measurements in each mode, pre at 0dB, to see if there is actually a difference for PCM playback.
I am going to plug D90 to A90 and Stereo AMP. Both have own volume controls and I do not want to have it duplicated in D90. Double vol control is pretty inconvenient.So what is point of using DAC mode? why take away volume control for no reason?
I would be interested to see measurements in each mode, pre at 0dB, to see if there is actually a difference for PCM playback.
yes so really I dont see the point of the feature unless there is another underlying difference, but I just found earlier in thread that Topping confirmed somewhere that DAC mode does enable DSD bypass mode so that would be the difference.