Where do you see impulse response graph?
I had measured it when I first got it but like I said I can't find the measurement at the moment.
Michael
Where do you see impulse response graph?
Ok, if by any chance you find it let me know kindly.I had measured it when I first got it but like I said I can't find the measurement at the moment.
Michael
I can say with Cuemix you can apply Parametric EQ in 3 bands to any line output, headphone output, spdif, etc. There is also compression and reverb I believe. I personally run 6x studio monitors and 1x subwoofer AND a XLR based tube amp. All working at the same time. Cue mix does not have VST support that I've noticed but you would use a DAW app for that.
So yes I am using the Motu MK5 as an active x over. The Monitors are all x'd over around 80hz and then the subwoofer picks up that low end.
Yeah I can't find any delay settings but for the reverb: View attachment 157680
Ok thank you very much.
So no delay setting is available, correct?
Would be nice to have such a delay settings in audio interfaces as this would help synch the microphone with my camera that is connected with a HDMI-USB adapter (Elgato Cam Link 4K) as currently there is a slight delay.
Maybe this helps?OK thanks. Just one last thing ... I don't even see the routing page like on MK4 anymore. How do you drive 6 outputs with the same input?
I stand corrected, it is minimum phase not linear phase.Ok, if by any chance you find it let me know kindly.
If I can, I take this opportunity to ask you for information on the functionality of the card because the manual does not show ...
Is it possible to use the MK5 as an active crossover? I mean, can you play 2 channel music from Windows and use the MK5 to do routing to multiple outputs and apply individual filters and delays (and maybe even VST effects)?
No, there is not.I can't find the information on the internet ... is possible to insert TRS to XLR adapters (direct without cable) adapters on the Ultralite outputs or there is not enough distance between connection?
Thank you.No, there is not.
What are you planning on driving with it? If you call Motu, they will easily be able to help even though I can't imagine that you're going to be using something that this will not match with.Thank you.
Another slightly more difficult question ... I need to figure out what minimum impedance the outputs can drive, so I need to know what opamps are on the final stage. Someone has verified perhaps?
What are you planning on driving with it? If you call Motu, they will easily be able to help even though I can't imagine that you're going to be using something that this will not match with.
How are you planning on running 8 channels through the preamp?I have a DIY preamp with -20 dB pad that has about 2.2k input impedance.
It's not overly low, but I wouldn't want to do any damage to the Ultralite.
Just two channel.How are you planning on running 8 channels through the preamp?
Then why are you getting an 8 channel dac?Just two channel.
6 (5.1) channels for home theater and 2 channels for stereo setup in second room.Then why are you getting an 8 channel dac?
I asked to MOTU technical support but they say they don't know... they just know that UL5 has 220 ohm output impedance.What are you planning on driving with it? If you call Motu, they will easily be able to help even though I can't imagine that you're going to be using something that this will not match with.