Hi all,
I have spent the best part of the day measuring my room and I am getting more and more confused with what I am expecting. I have taken measurements in an empty room (apart from my desk, photo below) and added in the limited acoustic treatment I have and tested each time.
This is where I have got to, filters generated at 1/6th smoothing, 55Hz cutoff, 24db slope. My room is 2.5 x 3.5 x 2.5 (w x l x h) and the speakers are on the 2.5m wall. MLP is approx 130cm from front wall (as per '38%' rule) and speakers are 50cm from side walls, 40cm from front wall and 110cm from the floor.
Here is my room (ignore mic position, not being used for measuring there).
I would really appreciate some assistance in generating some optimal EQ filters. I have attached the complete REW folder. The principal measurement I am using is 13 and the filter applied above is 23. There are some near field (1cm) measurements of the bass/mid drivers too.
REW file here: REW
Many thanks in advance
I have spent the best part of the day measuring my room and I am getting more and more confused with what I am expecting. I have taken measurements in an empty room (apart from my desk, photo below) and added in the limited acoustic treatment I have and tested each time.
This is where I have got to, filters generated at 1/6th smoothing, 55Hz cutoff, 24db slope. My room is 2.5 x 3.5 x 2.5 (w x l x h) and the speakers are on the 2.5m wall. MLP is approx 130cm from front wall (as per '38%' rule) and speakers are 50cm from side walls, 40cm from front wall and 110cm from the floor.
Here is my room (ignore mic position, not being used for measuring there).
I would really appreciate some assistance in generating some optimal EQ filters. I have attached the complete REW folder. The principal measurement I am using is 13 and the filter applied above is 23. There are some near field (1cm) measurements of the bass/mid drivers too.
REW file here: REW
Many thanks in advance