Jason K
Member
- Joined
- Nov 14, 2020
- Messages
- 96
- Likes
- 369
In a few days, the Mesanovic RTM10 arrives.
If you are curious what the RTM10 is
https://www.audiosciencereview.com/forum/index.php?threads/mesanovic-rtm10-monitor.16905/
I'm currently using Genelec 8351B and 7370A in my living room without any acoustic treatment.
There are plans for acoustic treatment soon, but the RTM10 is likely to arrive first.
I try to plan an AB test with an active 3-way speaker at a similar price point, both of which score high in preference scores and are expected.
https://www.audiosciencereview.com/...-genelec-8351b-blind-test-preparations.15490/
I looked at the above thread very interestingly, and it was a reference to the test method.
I am trying to construct a more complicated but similar signal path.
Network Player
-> Minidsp Nanodigi 2x8B digital in (8ch)
-> 1,2ch-8351B Digital in
-> 3,4ch-ADI2 Pro Digital in for RTM10 Analog in
-> 5,6ch-7370A Digital in
Nanodigi has 4 presets.
Presets 1 and 2 will be the comparison between the 8351B and the RTM10 alone, while Presets 3 and 4 will be the comparison including the subwoofer.
Also, all presets will be corrected to a consistent curve in the bass response.
As compared to Salon 2, I am not confident of setting the two pairs vertically, so I plan on setting AB-AB.
For the details, the delay and level of the difference in distance will be corrected for the speaker getting closer to the listening position.
I haven't tried it yet, but I think it will be okay.
Please leave any additional comments.
If you are curious what the RTM10 is
https://www.audiosciencereview.com/forum/index.php?threads/mesanovic-rtm10-monitor.16905/
I'm currently using Genelec 8351B and 7370A in my living room without any acoustic treatment.
There are plans for acoustic treatment soon, but the RTM10 is likely to arrive first.
I try to plan an AB test with an active 3-way speaker at a similar price point, both of which score high in preference scores and are expected.
https://www.audiosciencereview.com/...-genelec-8351b-blind-test-preparations.15490/
I looked at the above thread very interestingly, and it was a reference to the test method.
I am trying to construct a more complicated but similar signal path.
Network Player
-> Minidsp Nanodigi 2x8B digital in (8ch)
-> 1,2ch-8351B Digital in
-> 3,4ch-ADI2 Pro Digital in for RTM10 Analog in
-> 5,6ch-7370A Digital in
Nanodigi has 4 presets.
Presets 1 and 2 will be the comparison between the 8351B and the RTM10 alone, while Presets 3 and 4 will be the comparison including the subwoofer.
Also, all presets will be corrected to a consistent curve in the bass response.
As compared to Salon 2, I am not confident of setting the two pairs vertically, so I plan on setting AB-AB.
For the details, the delay and level of the difference in distance will be corrected for the speaker getting closer to the listening position.
I haven't tried it yet, but I think it will be okay.
Please leave any additional comments.