Veri
Master Contributor
- Joined
- Feb 6, 2018
- Messages
- 9,603
- Likes
- 12,049
No, see this:Are these available to purchase yet?
All work has been delayed due to the coronavirus and we will produce new product and supply ASAP.
No, see this:Are these available to purchase yet?
All work has been delayed due to the coronavirus and we will produce new product and supply ASAP.
Yes I Will.Hello Ben1987!
Will you send a final, production unit to amirm (or Wolf) for review? and please let us know if its available in the EU, i want to buy one as well
It's a good solution.Maybe by adding a card and link via SPDIF
not very humbleI geniusly think it would be a game changer.
Sorry for the typo,I was going to say ‘’genuinely”not very humble
TI OPA1612 for I/V and "RICORE TECHNOLOGY" RT6863S for LPF.Please tell me what type of Op amp is at the output of the DAC.
Nice~~
And the power supply voltage of that op-amps ?
may be best that he at least keeps some stuff secretAnd the power supply voltage of that op-amps ?
±12V or ±15V both OK and I have tested these two voltage levels and there is no real difference. You can try two different voltages to see the difference!And the power supply voltage of that op-amps ?
±12V or ±15V both OK and I have tested these two voltage levels and there is no real difference. You can try two different voltages to see the difference!
LA-QXD1 is a complete device with a JTAG connector, but we don't currently support DIY services, so if you're interested you can try secondary development on LA-QXD1.I would to know if the LA qxd1 will offer the same feature ( I can't see the jtag connector ?)
My goal is to add a small oled display + IR receiver .
±12V or ±15V both OK and I have tested these two voltage levels and there is no real difference. You can try two different voltages to see the difference!