Don't hear noise on any gain setting with the k371'sHonestly with the Sabaj and my sensitive akg k371 I only hear noise with high gain. In low gain and medium gain, dead silence.
Don't hear noise on any gain setting with the k371'sHonestly with the Sabaj and my sensitive akg k371 I only hear noise with high gain. In low gain and medium gain, dead silence.
In the wolf's test, it was not connected to the ground wire, which affected the results. Amir's test was also mentioned in detail. A10h uses a round 5v power adapter with only +—, so it needs to be connected to the ground wire for testing.https://www.l7audiolab.com/f/sabaj-a10h/
Measurements from Wolf.
More proof of their shady powering ratings. With a standard 2v dac this thing (like the L30 before it) puts out less power than the Objective 2, Atom or Magni.https://www.l7audiolab.com/f/sabaj-a10h/
Measurements from Wolf.
Power is enough to make you deaf with Philips H2XR and Beyerdynamic Custom Studio. No noise issues and absolutely silent. Also perfect volume control and preamp function with 3 different gain settings like the HP amp.More proof of their shady powering ratings. With a standard 2v dac this thing (like the L30 before it) puts out less power than the Objective 2, Atom or Magni.
NopeIs there any issue with static discharge for the Sabaj like it was for the old Topping or are both units safe to buy.
In the wolf's test, it was not connected to the ground wire, which affected the results. Amir's test was also mentioned in detail. A10h uses a round 5v power adapter with only +—, so it needs to be connected to the ground wire for testing.
I think it is to minimise interference to the measurement machine, with a cable straight to headphone it should work fine without special tinkering.How does one go about grounding the unit in our home setups to make sure we minimize electrical noise? Thank you.
If you need EQ pre-gain (will you be using some kind of heavy EQ profile?) : No. Perhaps consider A20h, I bought that one recently.Hello i'v been lurking alot on this forum and today i decided to subscribe
is this amp capable of driving the edition XS properly?
View attachment 173600
Ok ty for the suggestion,i will consider the A20h also.If you need EQ pre-gain (will you be using some kind of heavy EQ profile?) : No. Perhaps consider A20h, I bought that one recently.
In other cases, 100+dB is plenty loud right? 0.6V needed for 105dB is not that difficult a load.
hi do you get noise also with open inputs?It is noisy with sensitive earphones. L30 isn't. So unless you don't use any, and want the resistor volume control, this isn't really "better" but rather meh.
I think it highly depends on the RCA input and how sensitive the earphone/headphone is. Wolf's measurements show noise, Amir's show much less..hi do you get noise also with open inputs?
maybe the noise comes from upstream
hi thank you for the very kind and helpful replyI think it highly depends on the RCA input and how sensitive the earphone/headphone is. Wolf's measurements show noise, Amir's show much less..
"It depends".
Set the A10h to maximum volume and then the Kandy as loud as you can hear.Hi ! received one and i am now listening to it
Nice clean sound no particular noise
Will it open up a little more with use ? i mean does it need some hours to perform at the top ?
I was looking for a cheap but decent remote controlled volume control and i really hope this will work
I have and old Roksan Kandy Ka-1 MkIII integrated that i like but the volume control is not working properly
I intend to put this Sabaj in front of it and the volume of the Kandy at max
Hi thank you very much for the valuable advice I will doSet the A10h to maximum volume and then the Kandy as loud as you can hear.
So you have the security of not overdriving the Kandy and its noise does not have such a strong effect.