Yes indeed. Were not all the board spacers to be used the ones provided with the KTB?For the little bronze feet you need use the screws from the KTB kit.
The only screw that are with the case are the 8 screw for front and back plate.
Yes indeed. Were not all the board spacers to be used the ones provided with the KTB?For the little bronze feet you need use the screws from the KTB kit.
The only screw that are with the case are the 8 screw for front and back plate.
The important part:Manual is on their site if we pick "Download" as below
View attachment 39822
Manual suggest only use 2 screws to mount PCB:
View attachment 39823
why did you put the long spacers above the board?Ok, as I wrote up from memory I now had to see myself what it looked like again...
so actually underneath the nu, then the long spacer with short thread and on top if you like the short space with long thread. Not other way round because then the tiny black screws from outside in through bottom will not fit.
(oeps, upside down)View attachment 39850
DigiKey - pick your country from the dropdown list in the top right of the page. I don't think they do black friday deals.hi guys. anyone knows if there will be any black friday deals on the tone board? in europe is there any other option than audiophonics to buy it? cheers
taxes and shipping to Europe will raise the cost significantlyDigiKey - pick your country from the dropdown list in the top right of the page. I don't think they do black friday deals.
why did you put the long spacers above the board?
Did you even look at the link? They have local sites in most European countries so no additional taxes apply. The UK site has free delivery for orders of that value.taxes and shipping to Europe will raise the cost significantly
for Europe i think only Audiophonics is the option
My bad sorry...Did you even look at the link? They have local sites in most European countries so no additional taxes apply. The UK site has free delivery for orders of that value.
the local sites have nothing to do with where they ship from. they are shipping from usa. i asked them by email, some time ago my friendDid you even look at the link? They have local sites in most European countries so no additional taxes apply. The UK site has free delivery for orders of that value.
as long as the job is done. would this cable be ok for example?
The grey cable they supplied with the early stock has caused problems for many people - brief USB disconnects which stop playback, and may need the card plugging in again or the application restarting to restart playback. Because of this they changed cables - newer stock has a black khadas branded cable that should be more reliable. Any decent type A to type C data cable should work, but based on the schematic I suspect type c to type c may not, similar but not identical to the problem with the Pi 4. Random cables from Banggood/Ali/Ebay/Amazon may or may not be decent, and it's hard to tell until they arrive.should i immediatelly replace the usb cable?is it crap?
i do that because i have other things connected to the mixer and i want to control easily many devices. i have also connected my drums, and my laptop etc and i want to control everything. i have to do that. so i will have the pc at 100%. that leaves me 2 options. haveing the amplifier as loud as possible and controlling the volume from the mixer, or having the console mixer at 0db and maintaining volume needed, from the amp. any ideas what would be better to avoid hump area? cheers guysthe cable works fine
the volume of the output from the pc to the khadas should be 100%, as best as i understand how signals work; best pathway would be direct to the amp - an intermediate mixer is complicating the chain
why do that ?
thank you. I was googling on how to disable software volume in pc. I thought it can't be done, can it? I am using Windows 7x64For Bit-Perfect playback you need the computer to be at 100% volume or even better with disabled s.ware volume.