- Joined
- Jul 29, 2019
- Messages
- 352
- Likes
- 1,156
Vague summary
Marchaudio
1.Alan says the OP is lying. the Sointuva WG was fine.
2.Provide some ideas of the driver's problem and how to cure them, as he did on Sointuva WG.
(he's been banned from ASR, so to check his point of view, it's a good idea to visit
DIYaudio https://www.diyaudio.com/
and Marchaudio's own forum http://forum.marchaudio.com/index.php)
The OP
1.Nuyes claims, he had observed some unspecified product defects and Alan don't accept that.
2.Due to complex circumstances, he said had to modify them by directly himself and measurements were taken after modding by directly him self, shows improvements.
------------------
But, I could say this. For the science, It doesn't matter at all what ever happened before, at right this moment. We'd better remind What Our real enemies are. Non of eachother, but the all of Distortions, Nonlinearities, Mechanical limitations are.
Also, I purchased a newest Marchaudio P422 purifi based amp (arrived a few days ago, really neat and clean interior, soon will be measured, then I'll post.), and my Sointuva WGs with personalised paint job.
(one of my friends bought them as well, yes with custom paint work. both of pairs me and friend's are now on progress as I know.)
When my Sointuva WG arrives, I as a detached observer would like to measure a pair of speakrs surely without any damage or alteration with OP.
If the friend I mentioned have will to join this session, we can get well controlled 2 pairs of clean raw data confirmed by 3rd party observers which is good for both Marchaudio and OP.
It will help all of us to figure out what to do.
Cheers.
Marchaudio
1.Alan says the OP is lying. the Sointuva WG was fine.
2.Provide some ideas of the driver's problem and how to cure them, as he did on Sointuva WG.
(he's been banned from ASR, so to check his point of view, it's a good idea to visit
DIYaudio https://www.diyaudio.com/
and Marchaudio's own forum http://forum.marchaudio.com/index.php)
The OP
1.Nuyes claims, he had observed some unspecified product defects and Alan don't accept that.
2.Due to complex circumstances, he said had to modify them by directly himself and measurements were taken after modding by directly him self, shows improvements.
------------------
But, I could say this. For the science, It doesn't matter at all what ever happened before, at right this moment. We'd better remind What Our real enemies are. Non of eachother, but the all of Distortions, Nonlinearities, Mechanical limitations are.
Also, I purchased a newest Marchaudio P422 purifi based amp (arrived a few days ago, really neat and clean interior, soon will be measured, then I'll post.), and my Sointuva WGs with personalised paint job.
(one of my friends bought them as well, yes with custom paint work. both of pairs me and friend's are now on progress as I know.)
When my Sointuva WG arrives, I as a detached observer would like to measure a pair of speakrs surely without any damage or alteration with OP.
If the friend I mentioned have will to join this session, we can get well controlled 2 pairs of clean raw data confirmed by 3rd party observers which is good for both Marchaudio and OP.
It will help all of us to figure out what to do.
Cheers.
Last edited: