- Thread Starter
- #21
Yes you are correct in your understanding.Sorry, I can't see where sample B comes from, so both A and B are from the owner as a pair? wondering are the serial no. differs significantly.
Since both sample A and B are with GLM I bet it was not GLM corrected but sample B is what I would consider on axis anechoic flat response with only +1db shelf, while Amirm's review sample and sample have a peak ~3db (still within +/-3db but the peak is what I would consider defect in Genelec 8x3x).
it seems like either sample B is actually with the latest firmware correctly identifying the problematic unit and fixed it, or it used a correct facility to do the factory calibration.
Both samples were purchased new by their owners at one time.
Sample A also had a newer version of the firmware, but I observed similar behavior to the samples Amir measured.