omarkhayamma
Member
- Joined
- Dec 13, 2019
- Messages
- 9
- Likes
- 0
I read your post again.
Since foober2000 is operating in ASIO exclusive mode, the PC can only output from foober2000's USB. Therefore, BT cannot operate.
If you want to output in BT, you need to manually switch the operation mode of foober2000 to BT output. It cannot operate at the same time as USB and BT.
As for the display of icons, two types of connection, USB and BT, are set between the laptop PC and D50, so two icons are displayed. This is correct.
The speaker icon represents the USB connection with the D50s. Therefore, BT pairing cannot be set. (There is none)
The headphone icon shows the BT connection with the D50s.
Your PC only displays the headphone symbol as a BT connection icon. As shown on the side, it is correctly paired with the D50s BT.
I think your D50s and laptop are functioning correctly as long as you read your post.
Excuse me. I am not good at English, so there are many mistakes in the text. But I love exchanging opinions with the people in the forum.
Toku you are 100% right. I actually figured this out somewhere between my posts but i didn't mention because it made me look like a complete fool....lol.
But the question about bluetooth output from foobar still stands. Is DS my only option (works great by the way, but only in 44,1kHz) or should i be able to have sound with other output modes, like ASIO or WASAPI via bluetooth? WASAPI works great with USB but when i turn to bluetooth and choose WASAPI (event): headphones there is a playback error: "Unsupported stream format: 96000 Hz / 16-bit / 2 channels"
Last edited: