- Joined
- Apr 16, 2020
- Messages
- 12
- Likes
- 4
Input is from a Schiit Modi 3. The listed specs are RCA, 75 ohms, 20Hz-20KHz, +/-0.25dB, Maximum Output: 2.0V RMSHow hot is your input in the Heresy? As in volts. You might be driving it into clipping.
That looks likely the case. I can't get the speakers to distort with the Magni Heresy set on low gain. On high gain they start distorting when the Heresy's volume knob gets turned up, and the distortion goes away with reducing the Heresy's volume. This is regardless of the volume setting on the speakers' amp.Or driving the speaker amp inputs into clipping with the Heresy output.
So, yes, looks like it might just be clipping with the speaker amp. Thanks for helping figure that one out.