It seems your forums have grown quiet, unfortunately. One way to liven them up again is to send a unit for review to Amir, not to validate your data, but to expose your name, company, and products to the whole ASR forum.
And with luck, I’ll have my lab set up and going this week in my new location. Still aching from carrying boxes…BTW
@SIY has agreed to measure the new amps for AudioXpress like he did with the 150W modules in this article:
https://audioxpress.com/article/fre...d-audio-bosc-and-purifi-audio-eigentakt-eval1
finally got my modules and now the tests ...
the first impression is verry impressive
i will let it work for a couple of days to see if anything will change and a test with and without Line Filter. Then little interior cosmetics etc.
About 1.5 to 2dB improvement in THD+N at power levels of 50+ wattsamplifier is slightly better at 50W of output power and up.
About 1.5 to 2dB improvement in THD+N at power levels of 50+ watts
This is huge! Are you going to respin your boards to accommodate this extra capacitance? What are the rail values BTW (if it's not a secret)?
no, i need XLR
I have one question so if someone can help me, I need a balanced Line router/input selector so I can easily switch my stereo and HT, all in all I need something according to the scheme in the picture, does anyone have any suggestion, it could be DIY
It seems your forums have grown quiet, unfortunately. One way to liven them up again is to send a unit for review to Amir, not to validate your data, but to expose your name, company, and products to the whole ASR forum.
Happy to.
I have sent him many messages without any response. I believe he will not review my products because I post my own measurements and he is all about getting measurements for products where they are not avaialble.
thanks for the effort, i ordered a custom LR 1 Pro router from mapletree audio
Very excited to see your build. I am looking forward to making MonoBlocks out of these boards as you have. Can you please post you impressions about the amps. Is the SS "box" on the side just after the Mains a hum eliminator?finally got my modules and now the tests ...
the first impression is verry impressive
i will let it work for a couple of days to see if anything will change and a test with and without Line Filter. Then little interior cosmetics etc.