Regardless, I think perhaps adding some toe-in, even the slightest, might most probably bring a notorious audio improvement... Try it, then select La fabulosa guitarra de Paco de Lucía , push play, proceed with further tiny adjustments....loop till satisfied...and let us know !!!!View attachment 169864
Is that an Altar to the Audio Gods? I can almost hear the votives and smell the incense burning…
... where do we go from here?
Please, what differences are there between TCT2 and TCT3 ?Or just order the XLR>TRS cable from Topping when ordering the amp.
TOPPING TCT2 3-Pin Male XLR to 6.35mm TRS Balanced Copper Cable OCC (Pair)
Buy TOPPING TCT2 HIFI Audio Large Three-core Revolution XLR Male Balance Cable on HiFiGo, you can enjoy a year warranty and the best after-sales service.hifigo.com
It seems to me that this wire is unlikely to be useful. Here you would rather need a cable with a female XLR plug.Please, what differences are there between TCT2 and TCT3 ?
Ohhh....male/female... didn't realize it, thanks.It seems to me that this wire is unlikely to be useful. Here you would rather need a cable with a female XLR plug.
I was thinking one was better than another for some reason, without realising the male/female connector....Thanks.One difference is Male/Female XLR's
In general I appreciate the breeze of fresh air these highly innovative PRC based manufacturers brings into the market for audio gear. - But honestly I don't think the world needs their "audiophile" overprized cable assortiment, too.I was thinking one was better than another for some reason, without realising the male/female connector....Thanks.
Just play a sine wave signal (you can download .wav files for this) through your audio chain, and measure the output voltage across the speaker terminals at the back of the amp (with speakers connected as usual - don't do this without a load connected). Be careful not to short anything out.Nice, How?
I'm not sure, but there are a lot of legs sticking out from the D-01, and they are soldered on.Is the D-01 cover glued?
D-01 looks like it's pressure-grouted (point wise). The distance between the two cooler mounting studs looks like there could be a TPA325x underneath. Could you measure the distance between the studs?Is the D-01 cover glued?
I have already closed the chassis and wired.D-01 looks like it's pressure-grouted (point wise). The distance between the two cooler mounting studs looks like there could be a TPA325x underneath. Could you measure the distance between the studs?