I am having a problem with DX7S playing Tidal where it stops playing for a few seconds then the screen flashes to USB and the back to display and sound.
I am using Windows 7 64 bit operating system through the USB connection. I also notice when I had the power to the DX7s through my computer backup when sound wasn't playing I had a clicking noise. I went straight to the wall outlet and that noise was gone.
I had to install the DX50 driver to get the DAC to work.
What settings should be using within Tidal ?
What settings in the Topping driver setup ?
I suspect the noise was ground loop issue.
I have a copy of Windows 10 and would I be better off going through aggravation of doing a fresh Windows 10 install to use with this DAC?
I love the way this DAC sounds and drives my 300 ohm ZMF Auteur's nicely.
Aoshida-HIFI Audio Store is giving me the run around about the sending me the DX7s vs the DX7 and that since the DX7s doesn't come with a remote. I pointed out that they need to change there ad since it is misleading. Will update all of you on their resolution. Worst case I will have to purchase a remote in May.
Thanks for your help.